H07RN8-F

H07RN8-F Multi core EI4 rubber insulated EM2 rubber sheath cable

Application:

H07RN-8-F can be constantly immersed in fresh water to a depth of up to 10 meters at a water temperature of +40oC. This makes it suitable as an energy supply cable for submersed pumps. However, it is not suitable for underwater power transmission, or installation in a waterway, or where it is possible that mechanical damage might occur and cause hazard. It is commonly used as a floater switch to connect equipment in industrial water and in flexible applications in swimming pools.

Construction:

1.  Conductor - Plain flexible annealed class 5 copper

2.    Insulation - EPR rubber(EI4)

3.  Filler - Rubber(If need)

4.  Binder tape - Non-hygroscopic material tape(If need)

5.    Outer sheath - PCP or equivalent synthetic elastomer(EM2)

Cross Section：

1C1.5~630mm2 

2C1~95mm2

3C1~300mm2

4C1~300mm2

5C1~95mm2

6, 7, 12, 18C1.5~4mm2

24, 36C1.5-2.5mm2

Temperature characteristics:                    

Conductor operating temperature: -25℃~60℃                  

Min. temperatrue laying condition: 0℃                 

Conductor short-circuit operating temperature (5s): 160℃

Minimum Bending Radius

Flexible:7.5x Outer Ø       fixed:4x Outer Ø

Electrical Characteristics:

Rated voltage: 450/750V

High voltage test: 2.5kV / 5min

Color:

Insulation: According to customer requirements 

Standard:

Cable design: EN50525-2-21 

Conductor: EN 60228